Traction Table Accessory Kit

Materials :

• Belt-Style Harness: Nylon, Vinyl, Polyester, Propylene webbing
• Knee Bolster Set: Foam, Vinyl
• Traction Pillow: Foam, Vinyl

Product Dimensions:

• Belt-Style Harness: Fits 24" - 60" Waist
• Knee Bolster Set: 11.5" x 9.5" x 7.5"
• Traction Pillow: 12" x 14" x 4"

Product Weight:

• Belt-Style Harness: 3.5 lbs
• Knee Bolster Set: 2 lbs
• Traction Pillow: 0.95 lbs

Color:

• Black

Product Origin:

• Made in USA

Instructions for Use:

Belt -Style Harness

Used in conjunction with a mechanical traction table to provide traction to patient.

1. Place belt on traction table with sewn red stripe facing up. Place the thoracic belt (black square hook) over non-traction device end of table. Pelvic belt should be placed at the traction table separation point. Align red dots on pelvic and thoracic belts to ensure proper alignment.

2. When lying supine on the belt, the patient's iliac crest should line up approximately one inch below the sewn red stripe.

3. Secure the outer pelvic belt snugly around the hips. Connect the 2 strap by snapping the quick release buckle. Tighten as necessary by pulling the strap.

4. For finer tension adjustment, simply lift the excess strap beyond the buckle and pull down and away with the excess strapping.

5. Close the thoracic belt around patient. Placing the belt toward the hips but under the rib cage. Normally the o-ring, by the quick release buckle, will be covered by the thoracic belt.

6. Hook the swivel buckle to the center metal o-ring on pelvic belt.

7. Proceed with traction treatment.

Knee Bolster Set :

Position the bolster as necessary to provide patient comfort.

Traction Pillow :

For use with a traction table system. Place the bar of the cervical traction table in the space between the two lobes on the pillow.

For use with manual traction or spinal traction: Position the patient with the larger lobe under the cervical spine and flat portion of the pillow under the shoulders.

If you have questions about the use of this product consult your health care professional.

Washing Instructions:

• Belt-Style Harness: Wipe clean as needed with a dry cloth.
• Knee Bolster Set: Wipe clean as needed with soap and water.
• Traction Pillow: Wipe clean as needed with soap and water.